Causae et Solutiones pro Inaequale DUXERIT Exue Lighting

1. Poor Conductivity

• Cause: The current cannot flow smoothly through each LED bead.
• Solution: Inspect and secure the strip wiring to ensure unimpeded electrical flow.

2. Inconsistent LED Bead Quality

• Cause: Variations in manufacturing can lead to different power outputs among beads.
• Solution: Select LED strips with uniform bead quality to ensure consistent power across beads.

3. Overly Long LED Strips

• Cause: The resistance in longer strips can make bulbs further from the power source dimmer.
• Solution: Divide long strips into shorter sections, each with its own power supply.

4. Improper Use

• Cause: Incorrect handling during installation or use can affect light distribution.
• Solution: Follow correct installation procedures and avoid excessive bending or compressing the strip.

5. Ambient Light Interference

• Cause: The intensity of room lighting can affect the LED strip's light output.
• Solution: Consider ambient light levels and choose strips with appropriate brightness.

6. Incorrect Installation Position

• Cause: The positioning of the strip can impact the distribution of light.
• Solution: Adjust the strip's installation position to alter light distribution.

7. Power Supply Issues

• Cause: An unstable or unsuitable power supply can lead to uneven lighting.
• Solution: Check the power supply for stability and replace if necessary.

8. Connection Line Problems

• Cause: Poor connection lines can impede electrical current.
• Solution: Inspect and repair the strip's connection lines to ensure they are secure.

9. Surface Contamination

• Cause: Dust or dirt on the strip's surface can affect light scattering.
• Solution: Regularly clean the strip surface with a soft cloth.

10. Brightness and Color Temperature Adjustment

• Cause: Brightness and color temperature settings may not suit the current environment.
• Solution: Adjust the strip's brightness and color temperature for the desired lighting effect.

11. Raising the LED Strip

• Cause: High light slots may prevent the light from the LED strip from being visible.
• Solution: Raise the LED strip to maintain a distance of about 4-5 cm from the top edge of the light slot.