Whether you are an electrician or just want to know how to connect LED light strips, this is the blog for you. I will teach you how to connect LED light strips with ease. It is a 5-minute task and anyone can do it. All you need to do is solder the ends of each strip together, as well as make sure that the end/ outgoing wires are connected to one particular strip connected to the ground for maximum lighting efficiency and brightness.
Fizarana: Ahoana ny fampifandraisana ireo jiro LED amin'ny tsirairay
Fizarana: Ny lafin-javatra tokony hodinihina rehefa manapaka sy mametaka tady LED
Fizarana: Ahoana ny fampifandraisana ireo jiro LED amin'ny famatsiana herinaratra
Fizarana: Tsara kokoa ve ny mampifandray ny LED amin'ny andiany sa parallèle?
Famaranana
Fizarana: Ahoana ny fampifandraisana ireo jiro LED amin'ny tsirairay
LED LEAD SPLES are a great way to add a little extra color and light to your home. They can be used in all sorts of ways, from lighting up a cabinet or shelf, to highlighting features in your home or even making a DIY lightbox.
Na dia mora apetraka aza ny LED, dia mety ho sarotra ny mampifandray azy ireo. Mba hampifandray ny jiro LED roa miaraka, ny hany ilainao dia a 2 pin connecteur ary kasety elektrika sasany.
Dingana 1: Unplug the first strip and lay it out flat on the table. Make sure that all of the wires are facing down on the table so they're not visible when you're finished with Step 2.
Dingana 2: Unscrew one end cap from each strip and set them aside for later use. You'll need them later!
Dingana 3: Now open the second strip's casing and pull out the wires inside so that they're sticking out through the plastic casing of your second strip. If there are any other pieces of plastic holding down wires inside of your second strip's casing (like clips), take them out as well so that there is nothing blocking access to your wires inside of your second bulb's casing
Fizarana: Ny lafin-javatra tokony hodinihina rehefa manapaka sy mametaka tady LED
LED strips are a great way to add light to your project, whether it's a home theater or a custom-built PC. They're inexpensive and easy to install. However, connecting them can be tricky because the connectors are small and soldering is required.
The first step involves clipping the ends of the LED strip and then soldering them together. You'll need some basic tools like wire cutters and a soldering iron with a fine tip.
Alohan'ny hampifandray ny tady LED anao dia misy zavatra vitsivitsy tokony ho fantatrao:
1) The most common types of connectors are JST SMT connectors (like these) and 0.1" pitch terminal blocks (like these). You can also find connectors for 2mm pitch strips (like these) or 3mm pitch strips (like these).
2) Azonao atao ny mampifandray tsipika maromaro miaraka amin'ny fametahana azy ireo amin'ny faran'ny farany na amin'ny lafiny iray amin'ny fampiasana connecteur JST SMT na sakana terminal.
3) Raha mampiasa bloc terminal ianao fa tsy connecteur JST SMT, dia ataovy izay hahazoana antoka fa manana tsimatra ampy ho an'ny LED rehetra misy toerana fanampiny izy ireo raha sendra misy zavatra tsy mety mandritra ny fametrahana na raha mila manampy LED bebe kokoa ianao any aoriana any. lalana!
Fizarana: Ahoana ny fampifandraisana ireo jiro LED amin'ny famatsiana herinaratra
LED strips can be tricky to connect. Unlike other LED products, they don't have a wiring diagram or a power plug.
We've put together this guide to help you figure out how to connect LED light strips.
Ny dingana voalohany dia ny fampandehanana ny famatsiana herinaratra anao ary ampifandraisina amin'ny tady LED anao. Misy fomba telo hanaovana izany:
Mampifandray ny famatsiana herinaratra mivantana amin'ny Strip
Ity no fomba tsotra indrindra. Ampidiro fotsiny amin'ny tendrony iray amin'ny fametahana ny tendron'ny lahy amin'ny famatsiana herinaratra anao, ary ampidiro amin'ny fivoahana ny tendron'ny vehivavy amin'ny famatsiana herinaratra.
Fampifandraisan-davitra maromaro miaraka amin'ny tariby Y-Splitter
If you're using more than one strip, you can use Y-splitter cables (available at any hardware store) so that each strip has its own male plug at one end and a female plug at the other end. This makes it easier for multiple strips to be plugged in at once, but it does mean that you'll need more room for outlets or extension cords around each outlet because there will be more wires coming out of them than if you were only using one strip per outlet. You will also need additional extension cords.
Fizarana: Tsara kokoa ve ny mampifandray ny LED amin'ny andiany sa parallèle?
Misy fomba roa mampifandray ny jiro LED: parallèle sy andian-dahatsoratra. Ato amin'ity lahatsoratra ity dia hanazava ny fahasamihafana misy eo amin'ireo fomba fifandraisana roa ireo isika ary hasehontsika anao ny fomba hanaovana azy ireo amin'ny tsipika LED.
Inona no maha samy hafa ny fifandraisana andian-dahatsoratra sy parallèle?
Rehefa mampifandray jiro LED mihoatra ny iray dia azonao atao ny mampifandray azy ireo amin'ny andiany na mifanitsy. Amin'ny fampifandraisana andiam-pandrefesana, ny tsipika tsirairay dia mandray anjara amin'ny famatsiana azy amin'izao fotoana izao amin'ny tsipika hafa. Izany dia miteraka famirapiratana mitombo ho an'ny singa rehetra. Ny fifandraisana parallèle dia ahafahan'ny singa tsirairay mandray ny voltase avy amin'ny unit famatsiana herinaratra (PSU). Raha be dia be ny singa mifandray amin'ny parallèle, dia mety tsy hahazo ny ankehitriny ampy avy amin'ny PSU, na ho may mihitsy aza raha tsy mahazo hery ampy.
Tsara kokoa ve ny mampifandray ny LED amin'ny andiany sa parallèle?
Ny safidy dia miankina amin'ny fampiharanao: Raha te-hahazo ny famirapiratana ambony indrindra amin'ny LED rehetra ianao, dia tsara kokoa ny mampifandray azy ireo amin'ny andiany. Na izany aza, raha mila fanjifana ambany kokoa ianao na te-hizara tsipika lehibe iray ho zana-tsipika kely kokoa (ohatra), dia ampiasao ny fifandraisana mifanitsy.
Raiso: Ankehitriny rehefa manana toro-hevitra sy fika vaovao ianao dia vonona ny hanomboka ny fifandraisan'ny jiro LED anao. Mirary anao ho tsara vintana!
Famaranana
If you're looking for quality, affordable LED strip lights and where to get the best deals, you should always look to China because it's probably the world's manufacturing center for those kinds of things.
Momba ny Mpanoratra
JerryHu
Mpanorina ny Lightstec.Engineering diplaoma.Maherin'ny 13 taona traikefa miasa amin'ny fandraharahana jiro nitarika. Mahazatra amin'ny famokarana vokatra jiro.
Mianara Kilasy Led Matihanina bebe kokoa izay vitsy kokoa ny olona miteny aminao alohan'ny hanaovanao fahadisoana.
Ovaj vodič za povezivanje LED trakastih svetala je izuzetno koristan! Jasne ilustracije i korak-po-korak objašnjenja čine proces jednostavnim za razumevanje. Za one koji žele da prodube svoje znanje o osvetljenju i tehnologiji, preporučujem da posete Telkom Univerzitet za dodatne resurse i edukaciju.