LED Strip Lights for Cars

LED strip lights can use for car lighting. we will tell you how to use this strip light in a car and the factors you need to notice.

LED strip lights are a great addition to any modern car's lighting system. They're not just used for merely running along the length of the trunk or lining the baseboards within your vehicle.

LED strip light can be used in different ways, and it doesn't have to look like a glaring strobe light. Here are some questions you will face when you use these lights inside your car:

Article Guide
    strip light with controller for car
    pink strip light for car interior

    Can I put strip LED lights in my car?

    Yes, you can put strip LED lights in your car. The most popular use for these lights is to add low lighting to the interior of your vehicle.

    The best place to install the lights is behind the foot-wells, as this will give you an awesome glow from under your feet.

    If you want to go all out and make it look like a nightclub on wheels, then check out our article on how to add low lighting to your car.

    How do you stick LED strips to your car?

    You can find the perfect LED strip light for your car, motorcycle, or truck from our great selection. You can choose from a wide variety of lights, including 12V LED strips, 18W LED strips, and more!

    How do you stick LED strips to your car?

    The easiest way to attach LED strips to your car is by using double-sided tape. This type of tape is easy to remove and reposition if necessary. The best part about it is that it's not permanent so you can easily remove it down the road if needed!

    Another option is using Velcro. The main advantage here is that you can easily adjust the location of the light strip if necessary while keeping it securely attached to your vehicle. The main downside is that this type of installation may leave behind some residue after the removal which could damage your paint job over time!

    If neither of these options appeals to you then another option would be using screws and bolts! This method does require drilling holes into your vehicle so make sure you don't damage any parts during this process otherwise it could end up costing you a lot more money in repairs down the road!


    SMD 2835 LED STRIP LIGHT 60LED/M , DC12/24V ,12W/M


    SMD 2835 LED STRIP  LIGHT “S” 60LED/M , DC12 ,12W/M


    SMD2835 LED STRIP LIGHT 120LED/M , DC24V ,24W/M




    SMD2835 LED STRIP LIGHT 192LED/M , DC12 ,24W/M


    SMD2835 LED STRIP LIGHT 192LED/M , DC24V ,24W/M

    Can you put LED strips on a car battery?

    Yes, you can use a car battery to power your strip light. You just need to make sure that the voltage of your strip light is compatible with your car battery. In most cases, they are compatible. Check battery led strips.

    The size of the strip light depends on the size of the car battery. You can use the same size battery for small cars and larger ones for big cars.

    If you want to get a little more out of it, you can also add solar panels to charge your battery during the day and use it at night.

    pink strip light for car interior

    How do you connect 12V LED strip lights to a car battery?

    How do you connect 12V LED strip lights to a car battery?

    The answer depends on the type of strip light you have. Most strip lights come with a built-in connector for connecting to a 12V power source, but there are other types that need additional accessories to be connected.

    For strips with built-in connectors, simply use the included connector to plug in the strip light. For strips that do not have connectors, use the cigarette lighter plug adapter or an inline fuse holder (depending on your vehicle's electrical system).

    For more information about wiring in your car, see our Wiring Diagrams section.


    Can a 9 volt battery power an LED strip?

    Yes, it can but you need to be careful.

    First of all, the length of your strip is important. If you have a strip that's more than 10 feet long, it will not work with a 9V battery. A 9V battery has only enough power to light up a relatively short distance of LED strip.

    If your LED strip is less than 10 feet long, then yes, you can use a 9V battery to power it.

    If your LED strip is less than 10 feet long and you want to use a 9V battery to power it, then you'll want to add an inline resistor into the circuit as well as some heat shrink tubing to protect everything from getting too hot or from shorting out on itself if something gets bumped by accident.

    You'll also want to make sure that you have alligator clips on each end of your strip so that you can easily connect them to the positive and negative terminals of your battery whenever you need them (such as in an emergency situation).

    How long will a 12v battery last with LED lights?

    The answer to this question is not as simple as you may think. There are a lot of factors that come into play and it can be difficult to determine exactly how long a battery will last when you're using LED lights.

    First, let's look at how much power an LED consumes.

    A typical 12V car battery has a capacity of somewhere between 80-100 amp hours. So if we take the average capacity (90 Ah) and multiply it by the current draw from our LED strip lights (12 V x .5 Amps = 6 Watts), we get 4.5 Ah consumed per hour or about 72 Ah consumed over 8 hours. This means that if you run your strip lights for eight hours straight off your car battery, you'll be down to about 54% capacity remaining in your battery! That's only 1/3 of its total capacity!

    If we increase the current draw on our battery slightly to account for inefficiencies in our wiring, that would mean that running these same lights for eight hours straight would consume about 5 Ah per hour or 80 Ah in total! That leaves us with 20% battery capacity remaining after 8 hours of use!

    Blue strip light for car interior

    What size battery do I need for LED lights?

    If you're looking to light up your car, boat, or motorcycle with LED strip lights, you're sure to find something that fits your needs. But how do you know what size battery you need?

    The answer depends on how much power you want and how long you want it to last.

    Power Consumption

    You can get a rough idea of the average power consumption of different LEDs by looking at their wattage. The higher the wattage, the more power it uses and therefore the longer it will last.

    For example:

    2-watt LEDs use about 0.3 amps at 12 volts. At this rate they'll burn for about 40 hours (4 days). A 24-watt LED would consume about 3 amps at 12 volts or 6 amps at 24 volts and will last about 80 hours (8 days). A 60-watt LED would consume 6 amps at 12 volts or 12 amps at 24 volts and will last about 160 hours (14 days).

    Different LED strip light for car

    LED Strip Lights for Car Exterior

    How do you install LED strip lights outside a car?

    Installing LED strip lights on the outside of a car is a great way to accentuate the exterior and make it look more modern.

    Here are some tips on how to install LED strip lights on your car:

    Get the right LED strips

    LED strip lights come in different types, such as RGB, single-color, and so on. You need to choose the right one for your car's exterior. If you want to paint your car with a single color, then you can use single color LED strip lights which are cheaper than RGB ones. If you want an even brighter effect, then use RGB LED strip lights which allow you to change colors according to your mood or preference.

    Prepare the surface before installing LED strip lights

    Before installing any type of LED strip light, make sure that the surface is smooth and clean so that there are no dust particles present which will cause problems while installing them later on. Cleaning the surface with water or alcohol can be done beforehand as well if needed.

    How do you hook up LED strips to a car?

    To hook up your LED strip lights to a car, you'll need some basic tools, including a drill and a screwdriver. You'll also need to make sure that the surface of your car is clean and clear of any dirt or grease.

    First, find a spot on your car where you'd like to install your LED strip lights. Make sure it's somewhere where they won't be in the way of anything else. For example, if you want to put them on the side panels of your car, look for an open space between two panels where you can drill holes into the metal and attach the tape with screws. If you want to put them on top of your hood or trunk lid, make sure there are no air vents or other obstructions in the way first.

    Once you've found a suitable spot for attaching your LED strips, start by drilling holes into the metal surface where you want them to go — usually about 2 inches apart from each other. Make sure that whatever material you're drilling through is thick enough so that when you screw in an eyelet into each hole, it won't leave any gaps between them when it comes time to attach them together.


    Are car LED lights waterproof?

    Yes, car LED lights are waterproof. The IP rating of the car LED light is IP67, which allows them to be used in rainy days and rainy nights. However, it is not recommended to use the light in a heavy rainstorm or a torrential downpour.

    Can you put LED strips under your car?

    The answer is yes, but it depends on the type of car you have. If it’s a sports car, then you can install LED strip lights for your car exterior. But if it’s a luxury car, this kind of installation can be a bit tricky and it might not look good on those types of cars.

    There are many ways to install LED strips under your car. You can use glue, screws, or double-sided tape to secure them in place. It’s up to you which method will provide the best result and is most suitable for your vehicle type.

    How do you keep LED strips from falling off in your car?

    If you are looking for a way to keep your LED strips from falling off in your car, then you have come to the right place.

    Here is what you need to do:

    First of all, get yourself some double-sided tape.

    Then, take your LED strip light and place it at the spot where you want it to be placed on the exterior of your car.

    Now, tear off one side of the double-sided tape and stick it on top of the LED strip light.

    Next up, peel off the other side of the tape and stick it on top of the spot where you want to place your LED strip light on your car's exterior.


    Why do my LED strips keep falling off?

    LED strip lights for the car exterior are a great way to add some extra style to your vehicle. They’re also very easy to install, with most kits coming with everything you need. However, if you have some experience with DIY projects, it’s not hard to install these yourself.

    If you want more information on how to install LED strips in your car, read on!

    Installing LED strips is easy as long as you know what you’re doing. If your LED strip keeps falling off or not sticking properly, there are a few things that could be wrong:

    You didn’t use enough glue – Make sure you use plenty of glue when installing your LEDs. If they don’t stick well enough, they will fall off after a short amount of time.

    You didn’t let the glue dry long enough – If your LED strip doesn’t stick well after being installed, give it at least 24 hours before trying again. The glue needs time to cure before being used.

    LED Strip Lights for Car Interior

    Can you have LED lights on the interior of your car?

    We are talking about LED strip lights for cars.

    If you’re looking for a new way to light up your car, then this is the right place for you.

    LED strip lights can be installed in all types of vehicles, from trucks and SUVs to sedans and hatchbacks. They are an excellent choice for people who want to add some color or texture to their car’s interior.

    LED strip lights come in a variety of colors, so you can choose one that fits your style. You can also get them in different lengths, so you have the flexibility to choose how many you need for your vehicle.

    You might be wondering if these lights are safe for use in cars, especially if they’re going to be on all day long while you drive around town or on the highway. The good news is that they are extremely durable and resistant to damage from heat and water, which means they won’t cause any problems with your vehicle's electronics system or its electrical components when they're installed properly and used properly by following manufacturers' recommendations.

    How do you install interior LED strips in a car?

    LED strip lights are a popular choice for interior car lighting because they're easy to install, cool to the touch, and don't require much effort to install.

    The process of installing LED strip lights in your car is simple. Once you've chosen the type of LED strip light that fits your vehicle, you can follow these steps:

    1) Remove any existing interior trim from the area where you intend to install the LED strips. This includes things like door panels and kicks plates.

    2) Clean off the surface where you plan on installing the LED strips with some prophylaxis alcohol (IPA). The IPA will remove any dust or dirt from the surface so that it's clean and dry when you begin installing the LEDs.

    3) Use a tape measure to measure out where you want each LED strip to go. Make sure that each strip reaches all the way across the area you're working on so there aren't any gaps between them when they're installed.

    4) Drill holes into your door panels or kick plates where each LED strip will go using a drill bit that matches up with your chosen wire gauge for your particular model of car (usually 10 AWG or 12 AWG). Make sure that these holes are big enough for your chosen led strip light.


    Are car interior LED lights worth it?

    LED strip light inside carIf you want to make your car look more stylish and unique, then yes. If you want to replace fluorescent bulbs with something that has a longer lifespan, then no.

    If you're looking for a way to improve the look of your vehicle, you may want to consider adding some LED strip lighting. These lights come in different colors and brightness levels so they can be used almost anywhere inside your vehicle, even behind the dashboard or under the seats. There are also different types of LEDs that allow you to put lights into hard-to-reach places like underneath the hood or under the bumper cover.

    Can you replace interior lights with LED?

    LED strip lights are a great way to light up your car. They’re easy to install, energy-efficient, and can be used to create some really cool effects. But one question we get a lot is whether or not it’s possible to replace the fluorescent bulbs in your car with LEDs. It’s actually pretty easy to do!

    If you have a newer vehicle (made after 2009), chances are that the interior lighting was already replaced with LEDs when it was built. If your vehicle is older than this, then there’s a good chance that replacing the lights won’t be as easy as just swapping out one bulb for another.

      Questions? Write us!

      7/24 Hours Service, we will always be back to you as quick as we can, and won't more than 12 hours after received your message. Any question feels free to contact us right away. 🙂

      Contact Information

      F5-6, NO.41 Wanle East Road,
      Xiaolan, Guangdong,China.


      Update cookies preferences